{"id":108834,"date":"2025-08-15T02:30:00","date_gmt":"2025-08-15T00:30:00","guid":{"rendered":"https:\/\/www.sonnenseite.com\/?p=108834"},"modified":"2025-08-15T09:12:56","modified_gmt":"2025-08-15T07:12:56","slug":"new-solar-cells-could-power-devices-from-indoor-light","status":"publish","type":"post","link":"https:\/\/www.sonnenseite.com\/en\/science\/new-solar-cells-could-power-devices-from-indoor-light\/","title":{"rendered":"New solar cells could power devices from indoor light"},"content":{"rendered":"\n

An international team led by UCL researchers has developed durable new solar cells capable of efficiently harvesting energy from indoor light, meaning devices such as keyboards, remote controls, alarms and sensors could soon be battery free.<\/p>\n\n\n\n

The team used a material called perovskite which is increasingly used in outdoor solar panels and, unlike traditional silicon-based solar panels, has potential to be used indoors as well as its composition can be adjusted to better absorb the specific wavelengths of indoor light.<\/p>\n\n\n\n

A major drawback of perovskite, however, is that it contains tiny defects in its crystal structure \u2014 known as \u2018traps\u2019 \u2014 which can cause electrons to get stuck before their energy can be harnessed. These defects not only interrupt the flow of electricity but also contribute to the material\u2019s degradation over time.<\/p>\n\n\n

\n
\"Panels<\/a><\/figure>\n<\/div>\n\n\n

In a study published in the journal Advanced Functional Materials<\/em>, the team describes how they used a combination of chemicals to reduce these defects, potentially making perovskite indoor solar panels viable.<\/p>\n\n\n\n

The perovskite photovoltaics they engineered, the team say, are about six times more efficient than the best commercially available indoor solar cells. They are more durable than other perovskite devices and could be used for an estimated five years or more, rather than just a few weeks or months.<\/p>\n\n\n\n

<\/p>\n\n\n\n

\n

\u201cBillions of devices that require small amounts of energy rely on battery replacements \u2013 an unsustainable practice. This number will grow as the Internet of Things expands,” Senior author Dr Mojtaba Abdi Jalebi (Associate Professor at the UCL Institute for Materials Discovery).<\/p>\n<\/blockquote>\n\n\n\n

\u201cCurrently, solar cells capturing energy from indoor light are expensive and inefficient. Our specially engineered perovskite indoor solar cells can harvest much more energy than commercial cells and is more durable than other prototypes. It paves the way for electronics powered by the ambient light already present in our lives.<\/p>\n\n\n\n

\u201cWe are currently in discussions with industry partners to explore scale up strategies and commercial deployment.<\/p>\n\n\n\n

\u201cThe advantage of perovskite solar cells in particular is that they are low-cost \u2013 they use materials that are abundant on Earth and require only simple processing. They can be printed in the same way as a newspaper.\u201d<\/p>\n\n\n\n

One problem in earlier perovskite solar cells was the presence of high density of traps in the material and its interfaces with charge collecting layers, which disrupted the flow of charge and caused energy to be lost as heat.<\/p>\n\n\n\n

The research team introduced a chemical, rubidium chloride, that encouraged a more homogeneous growth of perovskite crystals with minimal strains, reducing the density of these traps.<\/p>\n\n\n\n

Two other chemicals* were added to stabilise two types of ions (iodide and bromide ions), preventing them from migrating apart and bunching into different phases, which degrades the performance of the solar cell over time, again by disrupting the flow of charge through the material. <\/p>\n\n\n\n

\n

\u201cThe solar cell with these tiny defects is like a cake cut into pieces. Through a combination of strategies, we have put this cake back together again, allowing the charge to pass through it more easily. The three ingredients we added had a synergistic effect, producing a combined effect greater than the sum of the parts,\u201d Lead author Siming Huang, a PhD student at UCL\u2019s Institute for Materials Discovery.<\/p>\n<\/blockquote>\n\n\n\n

The team found that their solar cells converted 37.6% of indoor light (at 1000 lux \u2013 equivalent to a well-lit office) into electricity, a world record for this type of solar cell optimised for indoor light, that is with a bandgap of 1.75 eV (electron volts)**.<\/p>\n\n\n\n

The researchers also tested the solar cells to see how well they resisted degradation over time.<\/p>\n\n\n\n

After more than 100 days, the newly engineered cells retained 92% of their performance, compared to a control device (perovskite whose flaws had not been reduced) that retained only 76% of its initial performance.<\/p>\n\n\n\n

In a harsh test of 300 hours of continuous intense light at 55 \u00b0C, the new solar cells retained 76% of their performance, while the control device dropped to 47%.<\/p>\n\n\n\n

The team involved researchers from the UK, China and Switzerland.<\/p>\n\n\n\n

The work was supported by the Henry Royce Institute for Advanced Materials. The team received funding from the UK\u2019s Engineering and Physical Sciences Research Council (EPSRC) and Department for Energy Security and Net Zero, as well as from UCL, the British Council and London South Bank University.<\/p>\n\n\n\n

*<\/em> Organic ammonium salts N<\/em>,N<\/em>-dimethyloctylammonium iodide (DMOAI) and phenethylammonium chloride (PEACl).<\/p>\n\n\n\n

**<\/em> The bandgap represents the minimum energy required to excite an electron so that it joins the electrical charge through the solar cell. A bandgap of 1.75 eV is tuned to absorb the higher-energy, mostly visible wavelengths of light emitted from indoor sources.<\/p>\n\n\n\n