{"id":114153,"date":"2026-04-22T02:28:00","date_gmt":"2026-04-22T00:28:00","guid":{"rendered":"https:\/\/www.sonnenseite.com\/?p=114153"},"modified":"2026-04-22T11:31:12","modified_gmt":"2026-04-22T09:31:12","slug":"drone-inspection-of-solar-cells-to-ensure-green-power-for-more-homes","status":"publish","type":"post","link":"https:\/\/www.sonnenseite.com\/en\/science\/drone-inspection-of-solar-cells-to-ensure-green-power-for-more-homes\/","title":{"rendered":"Drone inspection of solar cells to ensure green power for more homes"},"content":{"rendered":"\n

Aerial images can reveal whether solar cells are defective, while AI can tell us why. This will ensure faster repair of solar cells\u2014and a greater harvest of green power.<\/p>\n\n\n\n

As more solar cells appear in the Danish landscape, the debate is divided: Many believe that green energy is important, but few are willing to let solar parks spoil a beautiful view.<\/p>\n\n\n\n

Researchers from DTU have found a solution to ensure that existing solar cell installations are used to their full potential.<\/p>\n\n\n\n

\u201cTo know what is going on in the solar cell plants, we must regularly check the modules: Are they properly connected, is the glass intact, is there dirt blocking it, is safety optimal? With drone inspections, we can quickly get the full overview,\u201d says senior researcher at DTU Electro Gisele Benatto.<\/p>\n\n\n\n

In collaboration with the company UXV Technologies she has developed a specially designed camera that is attached to a drone. When the sun sets, the drone is sent up and power is supplied to the solar modules.<\/p>\n\n\n\n

As the drone flies over the modules, it takes a kind of X-ray image from the air on which the solar cells glow using electroluminescence imaging technology. Cells that glow less, or totally dark spots on the otherwise illuminated images, reveal if the electricity production is low \u2013 or has come to a complete standstill.<\/p>\n\n\n\n

AI makes the diagnosis<\/h4>\n\n\n
\n
\"\"<\/a>
Solar array with visible defects: New method developed by DTU enables detection (Photo: dtu.dk)<\/figcaption><\/figure>\n<\/div>\n\n\n

Similar technological solutions are hard to find today. The inspections carried out today are done manually without technology and rarely take place.<\/p>\n\n\n\n

\u201cIt is not unusual for entire modules to be left standing for long periods without producing electricity. Large solar cell installations are inspected once every 2-4 years \u2014 because it is an expensive and time-consuming process,\u201d says Gisele Benatto.<\/p>\n\n\n\n

She wants to use drone technology to make it attractive for plant owners to have their solar cells checked more often, so that low power production in solar cells can be detected more quickly.<\/p>\n\n\n\n

If this is the case, the solution’s AI platform can use the drone images to determine the cause of the low power production, the extent of the power loss, and what needs to be done to solve the problem.<\/p>\n\n\n\n

\u201cAI responds immediately with the action needed to maximize the yield of green power,\u201d says Gisele Benatto.<\/p>\n\n\n\n

Power for more homes<\/h4>\n\n\n\n

How much more green power can be harvested from a solar power plant if the drone solution is implemented depends on how old the plant is, what condition it is in, and how many inspections are carried out.<\/p>\n\n\n\n

However, Gisele Benattos team estimate that a well-functioning system that is inspected once a year could generate 1-2% more energy annually, while an older system in poorer condition could provide between 2-5% more energy.<\/p>\n\n\n\n

\u201cIf we use our 100 MW test facility in Roskilde as an example, a 1% improvement in annual energy yield would mean that we could supply 230-250 Danish households with electricity for a whole year,\u201d says Mahmoud Dhimish, associate professor and AI expert at DTU Electro.<\/p>\n\n\n\n

He adds that another positive effect of the solution is that it enables solar system owners to prioritize repairing or replacing the modules in the system that consumes the most energy first.<\/p>\n\n\n\n

New technology under development<\/h4>\n\n\n\n

At present, the researchers’ drone can take pictures of up to 4 modules per minute. In the long term, this number will increase, and the drone will be able to perform the task without human control.<\/p>\n\n\n\n

\u201cThe plan is to get to the point where the drone can stop at each module, take pictures for a certain number of seconds, and then fly on to the next module,\u201d says Gisele Benatto.<\/p>\n\n\n\n

Today, people must stand on the ground and control the drone, just as the researchers must manually activate the electricity in the solar park. Gisele Benatto is researching the development of imaging technology based on light through the phenomenon of photoluminescence. This will enable her to illuminate the solar cells without using electricity, which means that hardware such as cables and wires can be completely avoided.<\/p>\n\n\n\n

\u201cIt’s a solution that eliminates the need for a heavy setup and allows us to obtain high-quality images more quickly,\u201d she says.
However, this research is still at an early stage.<\/p>\n\n\n\n

The upcoming plan for the electroluminescence imaging technology is to conduct test inspections of solar cell facilities in the small town Toreby on Falster.<\/p>\n\n\n\n

Why faults occur in solar cell systems<\/strong>
The most common causes of faults in solar cells depend on location and environment.
In Denmark, wind loads cause solar cells to mechanically stress in a way that makes them more prone to breakage. In addition, growing vegetation and bird droppings that block sunlight can make the solar cells heat up and reduce the energy yield. Trees that fall during a violent storm can pose a significant fire hazard in this context.
In desert areas, the biggest problem is that layers of dust from sand block sunlight on the solar panels.<\/p>\n\n\n

Source<\/h5>\r\n\n\n\n

DTU 2026<\/a><\/p>\n

Diese Meldung teilen<\/div>