{"id":90906,"date":"2023-04-27T09:35:17","date_gmt":"2023-04-27T07:35:17","guid":{"rendered":"https:\/\/www.sonnenseite.com\/?p=90906"},"modified":"2023-04-27T09:35:19","modified_gmt":"2023-04-27T07:35:19","slug":"gazelle-wind-power-unveils-third-generation-floating-offshore-wind-platform-technology","status":"publish","type":"post","link":"https:\/\/www.sonnenseite.com\/en\/economy\/gazelle-wind-power-unveils-third-generation-floating-offshore-wind-platform-technology\/","title":{"rendered":"Gazelle Wind Power Unveils Third Generation Floating Offshore Wind Platform Technology"},"content":{"rendered":"\n

Gazelle Wind Power<\/a> (Gazelle), the developer of a modular floating offshore wind platform<\/a>, is unveiling third generation technology this week at WindEurope 2023<\/a> in Copenhagen, Denmark. The company\u2019s enhanced design further refines Gazelle\u2019s solution to address the primary challenges facing the offshore wind industry\u2014such as cost, supply chain bottlenecks, and sustainability\u2014by providing a lightweight, cheaper design that minimizes the impact on fragile marine environments while using existing port infrastructure.<\/p>\n\n\n

\n
\"gazellewindpower.com\"
\u00a9 gazellewindpower.com<\/figcaption><\/figure>\n<\/div>\n\n\n

As a third-generation technology, the platform delivers enhanced mooring innovation that enables serial production. The platform makes first generation technology\u2014which was primarily designed to float and survive harsh ocean conditions\u2014obsolete and improves on second generation designs that are focused on industrialization. Instead, Gazelle\u2019s platform moves away from archaic models that are stationary, heavy, bulky, and difficult to assemble and transport while reducing costs by 30% compared to conventional semi-submersible designs. Part of this improvement comes from the reduction in steel versus traditional offshore platforms. For example, a one-gigawatt offshore wind farm using Gazelle\u2019s solution would save 71 kt of steel and reduce emissions of approximately 100 kt of carbon dioxide.<\/p>\n\n\n\n

The company\u2019s platform can be quickly and simply installed at project sites because it requires no specialist cranes or vessels thanks to a cost-effective, innovative design using globally available components and a modular assembly process.<\/p>\n\n\n\n

\u201cOn top of lowering costs and taking advantage of pre-existing infrastructure, every aspect of Gazelle\u2019s floating offshore wind platform is designed to minimize environmental impact by using less steel and materials that protect the biodiversity of marine ecosystems, eliminating seabed scouring, and reducing installation impact,\u201d said Gazelle CTO Jason Wormald.<\/p>\n\n\n\n

The platform\u2019s unique geometry provides reduced draft in port, which means it floats higher in the water enabling the use of shallow ports with high stability in towing and wet storage. Pivoting arms allow the platform to move with the wind, waves, and tides that result in lower forces, enabling a lighter\u2014and therefore cheaper\u2014structure.<\/p>\n\n\n\n

The Gazelle platform utilizes an innovative, dynamic mooring system representing a paradigm shift from an active ballast to a natural, passive system that balances forces and motions through a counterweight, keeping the turbine pitch low and improving operational efficiency. Vertical mooring lines attached to the pivoting arms reduce the platform\u2019s environmental footprint by minimizing impact and allowing for a 75% reduction in mooring length when compared to semi-submersibles with catenary mooring in depths of 100 meters or more.<\/p>\n\n\n\n

\u201cThrough industrial innovation, the platform components can be adjusted to accommodate all forecasted offshore wind turbine sizes, including the current 15MW or greater capacities,\u201d said Wormald. \u201cAdditionally, our platform can be produced anywhere in the world, supporting job creation through regionalized manufacturing.\u201d<\/p>\n\n\n\n