{"id":92806,"date":"2023-07-22T02:36:00","date_gmt":"2023-07-22T00:36:00","guid":{"rendered":"https:\/\/www.sonnenseite.com\/?p=92806"},"modified":"2023-07-21T17:43:23","modified_gmt":"2023-07-21T15:43:23","slug":"power-electronics-for-novel-heat-pumps-achieves-efficiency-of-over-99-7-percent","status":"publish","type":"post","link":"https:\/\/www.sonnenseite.com\/en\/science\/power-electronics-for-novel-heat-pumps-achieves-efficiency-of-over-99-7-percent\/","title":{"rendered":"Power electronics for novel heat pumps achieves efficiency of over 99.7 percent"},"content":{"rendered":"\n

Milestone in Fraunhofer lighthouse project \u201cElectrocaloric heat pumps\u201d<\/p>\n\n\n\n

In the Fraunhofer lighthouse project ElKaWe, researchers are working on the development of electrocaloric heat pumps as an alternative to the currently prevailing compressor technology. These new types of heat pumps promise higher efficiency and do not require refrigerants. Researchers at Fraunhofer IAF have now reached a milestone in power electronics: They have realized an ultra-efficient circuit topology for voltage converters with over 99.74 percent electrical efficiency. This result is a worldwide benchmark and an important step on the way to more efficient solid-state heat pumps.<\/p>\n\n\n\n

Heat pumps are extremely efficient systems for heat generation and a central component of the heat transition. To increase the efficiency of heat pumps, researchers in the Fraunhofer lead project \u201cElectrocaloric Heat Pumps\u201d, or ElKaWe for short, are working on new types of heat pumps that do not require compressors and are expected to achieve higher efficiencies in the future.<\/p>\n\n\n\n

Due to their technology, today’s heat pumps achieve only about 50 percent of the physical Carnot limit, while the electrocaloric heat pump can theoretically achieve 85 percent. But how efficient electrocaloric heat pumps ultimately are also depends to a large extent on the efficiency of the integrated power electronics.<\/p>\n\n\n\n

Ultra-efficient power electronics due to gallium nitride<\/h4>\n\n\n\n

In the ElKaWe project, the Fraunhofer Institute for Applied Solid State Physics IAF is in charge of developing the drive electronics for electrocaloric heat pumps. For this purpose, the institute is researching devices based on the semiconductor gallium nitride (GaN) in order to increase power density and efficiency.<\/p>\n\n\n\n

For the first time, the researchers have now developed and optimized power electronics specifically for electrocalorics. They have succeeded in implementing an ultra-efficient circuit topology for voltage converters based on GaN transistors, achieving an electrical efficiency of 99.74 percent in the electrical power path. The GaN-based multilevel DC\/DC converter thus sets global standards and far exceeds the previous state of research of less than 90 percent conversion efficiency for electrical control of these novel heat pumps.<\/p>\n\n\n\n

More efficient electronics provide more efficient heat pumps
<\/h4>\n\n\n\n

The significant increase in efficiency of the drive electronics has a direct effect on the coefficient of performance of the entire system. Until now, electrocaloric heat pump systems were limited by the losses of the electronics, among other things. The increased electrical efficiency leads directly to a higher coefficient of performance of the entire heat pump system and is thus a milestone on the way to more efficient heat pumps.\u00a0<\/p>\n\n\n

\n
\"Fraunhofer
\u00a9 Fraunhofer IAF | Schematic design of an electrocaloric heat pump, which is to be used with efficient GaN power electronics for emission-free air conditioning of buildings in the future.<\/figcaption><\/figure>\n<\/div>\n\n\n

\u201cOur ultra-efficient power electronics make it realistic for the first time to achieve well over 50 percent of the maximum theoretical coefficient of performance with electrocaloric heat pumps, even at the system level. There is still a lot of research to be done, but in future this technology could become a more efficient and completely emission-free solution for heating and cooling,\u201d says Dr. Stefan M\u00f6nch, researcher in the field of power electronics at Fraunhofer IAF.<\/p>\n\n\n\n

\u201cEssential for realizing a high coefficient of performance of electrocaloric heat pumps is a very high efficiency in materials, electronics and heat transfer. If you get all this under control, electrocalorics has enormous potential,\u201d adds Dr. Kilian Bartholom\u00e9, project manager of ElKaWe and researcher at the Fraunhofer Institute for Physical Measurement Techniques IPM.<\/p>\n\n\n\n